CMPlusB
BACK
CM+

Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.

Inverted AND regular impact creasing in the same pass!

Up to 100 impact creases per sheet.

Up to 100 jobs can be stored into memory.

Easy-to-use programming. Set up in minutes!

Rotary perforations (at the entrance of the machine for accuracy; no tail whip) are anvil style and produce a "burr-free" finish.

Microperfs are also available.

Optional strike perf attachment available for "box" or "T" perfs.

NOTE: machines are pneumatic and require compressed air (compressor; not supplied) to operate.

Electrical:

115V/60Hz/20A or 230V/50Hz/20A

Maximum Speed (impact creasing):

3000, 8.5 x 11"/A4 sheets per hour

Maximum Speed (rotary perf/score):

8000, 8.5 x 11"/A4 sheets per hour

Maximum stock size:

18"W x 25.5"L (45 x 65cm)

Minimum stock size:

3"W x 5"L (7.6cm x 12.7cm)

Stock weight: Dimensions:

 

12lb. - 18 point (45- 385 gsm)

Length: 60" (1.52m)

Width: 27" (0.69m)

Height: 46" (1.17m)

Weight: 300 lbs. (137 kg)

Perforation options:

2,4,6,8,12 teeth per inch (TPI); 42 or 72 TPI MICROPERF

Rotary score options:

wide or narrow

Strike Perf attachment:

OPTIONAL